yachtpaint.com Homepage
Forum Home Forum Home > Repair & Maintenance > Topsides
  New Posts New Posts RSS Feed - Perfection tiny bubbles
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Forum LockedPerfection tiny bubbles

 Post Reply Post Reply
Author
Message
rohbob View Drop Down
Newbie
Newbie


Joined: 15 Feb 2017
Location: washington
Status: Offline
Points: 2
Post Options Post Options   Thanks (0) Thanks(0)   Quote rohbob Quote  Post ReplyReply Direct Link To This Post Topic: Perfection tiny bubbles
    Posted: 16 Feb 2017 at 8:05am
Help please:
 I am painting over 15 year old gelcoat ---- which is in good condition. I rotary sanded with 60 grit then again with 150. I applied 2 coats of 2 part Primekote primer with 150 grit sanding in-between. 
I then sanded with 220 and wiped down with 233N thinner.
I applied three coats of Perfection with sanding with 220 and 320 and wipedown in-between. I applied the paint with a closed cell foam roller and tipped off.
On the last coat a 'million' tiny bubbles appeared and did not lay down with tipping. ---- not sure what happened. I had wet sanded 24 hrs after the second coat, dried off and wiped down with 233N. I guess i will sand down and re-coat. I am just not sure what is going on. Did I not wait long enough after wiping down with 233N? 
Thanks for any ideas ------ Bob R.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down



This page was generated in 0.047 seconds.