Print Page | Close Window

Overcoating 200 with underwater epoxy

Printed From: yachtpaint.com
Category: Repair & Maintenance
Forum Name: Antifouling
Forum Description: Looking for antifouling advice post here
URL: http://www.yachtpaintforum.com/forum_posts.asp?TID=2459
Printed Date: 19 Jan 2018 at 6:46pm


Topic: Overcoating 200 with underwater epoxy
Posted By: BigLakeFG
Subject: Overcoating 200 with underwater epoxy
Date Posted: 11 Apr 2017 at 2:55pm
Hi There,

I'm looking at the overcoating window for 2000 going to antifouling.  There is a
window where we can apply antifouling without sanding.  I'm wondering about overcoating Interprotect 2000 with VC Underwater Epoxy.  Does the same no sand window apply?

Thanks!

Chris



Replies:
Posted By: BoatNut
Date Posted: 13 Apr 2017 at 9:31pm
If you are referring to two component VC Performance epoxy it can be applied to 2000e either at the tacky stage or after full cure without sanding. If you are talking about the one component VC vinyl coatings you have to wait for full cure of the 2000e and then sand it before applying the VC.  Don't apply one component VC products on tacky 2000e.



Print Page | Close Window